Gainward Dragon 3000
Name: |
Dragon 3000 |
Company: |
Gainward |
Chipset: |
3Dfx SST-V2 Pixelfx2, 2x Texelfx2 (Chuck, Bruce) at 90 MHz |
Bus: |
PCI |
RAM: |
4+8 MB EDO DRAM 22 ns 192 bit 90 MHz (Framebuffer / Texture) |
DAC: |
TVP3409-170CFN at 170 MHz |
Connectors: |
VGA In, VGA Out |
FCC-ID: |
ICUVGA-GW803N |
Direct3D: |
6 |
OpenGL |
? |
Manufactured: |
1998 |
The video signal of the primary graphics card is routed through a loopback cable and replaced by the Voodoo 2s own output when the board is used. Compared to the Voodoo a second texture unit was added thus enabling multitexturing capabilities. With the SLI connector (top side) you can pair two cards for increased performance and enabling 1024x768 as max. resolution for 3D accelerated modes. (SLI = Scan Line Interleave) The card on the photo has faster memory chips allowing operation at 110 MHz. The chip uses a 4x1 pixel linear filter to generate the 16 bit color of the output pixel.
Description to be done.
Gainward Dragon 3000 Drivers
3Dfx Voodooo 2 Driver and Documentation
3Dfx Voodoo2 Specs